2007 Arctic Cat 700 Diesel ATV Service Manual, Page 88Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 88

NOTE: If the piston pin bushing is replaced, the lubrication hole must be aligned and the bushing sizedIt is recommended
either condition exists, replace the bushing or connecting rod 23Measure the piston pins making sure to keep them with their
respective pistonconnecting rodThe piston pins must measure within specifications Cylinder Diameter Piston Diameter Clearance
74.990-75.000 74.930-74.940 mm 0.050-0.070 mm (2.9523-2.9527 in (2.9499-2.9503 in (0.002-0.003 in 75.000-75.010 mm 74.940-74.950
mm 0.050-0.070 mm (2.9527-2.9531 in (2.9503-2.9508 in (0.002-0.003 in 75.010-75.020 mm 74.950-74.960 mm 0.050-0.070 mm (2.9531-2.9535
in (2.9508-2.9512 in (0.002-0.003 in 24Making sure pistons are clean and ring lands are free of carbon deposits, measure