2007 Arctic Cat 700 Diesel ATV Service Manual, Page 91Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 91

0742-252 13Using an appropriate thickness gauge, measure the ring end gapEnd gap must be according to specifications 15Remove
in the 3rd (bottom) ring groove; then install the oil scraper ring over the expander making sure the oil scraper ring end
gap is not directly in line with the expander spring endsBInstall the 2nd (middle) compression ring in the middle ring groove
with the TOP or UP markings on the ring directed toward the top of the pistonCInstall the 1st (top) compression ring in the
top ring groove with the TOP or UP markings on the ring directed toward the top of the pistonNOTE: The top compression ring
is full chrome (silver) and the middle compression ring has partial chrome band on the bottom sideBoth rings have chamfered