2007 Arctic Cat 700 Diesel ATV Service Manual, Page 93Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 93

22Repeat steps 15-21 for the second piston23Install the oil pump (see Section 4)24Install the water pump (see Section 4)25Install
pan cover was removed, place two new gaskets onto the oil pan; then install the oil pan cover and secure with the Allen-head
cap screwsTighten in crisscross pattern to specificationsDE440B 27Install new O-rings on the oil sump and return pipes; then
apply oil-soluble grease on the O-rings and place the oil pan into position 30Install the coolant bypass hose and secure
with the support clamps and two Allen-head cap screws to the two hollow studs; then secure the bypass hose to the fittings