2007 Arctic Cat 700 Diesel ATV Service Manual, Page 94Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 94

Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the
or cut the seal lips TRANSMISSION 1If the V-belt housing was removed from the crankcase, support the engine on blocks and
using new gasket, install the V-belt housing and tighten the mounting cap screws to specifications 33Secure with the existing
hardware and tighten to specifications 2Using new gasket, install the transmission into the V-belt housing and secure with
five cap screwsDo not tighten at this time 34The engine is now assembled and ready for connection to the transmissionsecondary