2007 Arctic Cat 700 Diesel ATV Service Manual, Page 104Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 104

Diesel Fuel Injection System The diesel engine in this Arctic Cat ATV is "compression ignition" engineExtremely high pressure
filter head where it either recirculates or is returned to the fuel tank via the fuel return hoseFuel flow is shut off when
the ignition switch is turned to the OFF positionA fuel solenoid valve is located on the fuel filter head and opens the valve
whenever 12 DC volt current is applied to the solenoidDE309A 2While holding pressure against the lift pump push rod, rotate
the engine until the push rod is fully retractedNOTE: If pressure is not applied to the push rod while rotating the engine,
the push rod may become dislodged from the eccentric ring requiring valve cover removal to relocate INSTALLING 1Using new
O-ring, place the fuel pump onto the cylinder head and secure with the existing hardwareTighten the nuts alternately until
the fuel pump is seated against the head; then tighten securely Lift Pump REMOVING 1Remove the banjo-fitting bolts securing