2007 Arctic Cat 700 Diesel ATV Service Manual, Page 127Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 127

3Remove the front wheels; then remove the front inner fender panels4Compress the hand brake; then engage the brake lever
panelKX041 6Release the brake lever lockNOTE: It is not necessary to remove the brake hoses from the calipers for this procedure
Front Differential NOTE: To remove the rear gear case, see Rear Gear Case in this section 7Remove the two brake calipersAccount
for the four cap screws and four 0.76 mm (0.030 in spacer washers REMOVING DIFFERENTIAL 1Secure the ATV on support stand
to elevate the wheels ! WARNING Make sure the ATV is solidly supported on the support stand to avoid injuryAF894D 2Remove
the drain plug and drain the gear lubricant into drain pan; then reinstall the plug 8Remove the tie rod cotter pins and discard