2007 Arctic Cat 700 Diesel ATV Service Manual, Page 129Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 129

17Using T-30 torx wrench, remove the three screws securing the front drive actuator to the gear case; then remove the actuator
This procedure can be performed on rear gear case; however, some components may vary from model to modelThe technician should
use discretion and sound judgment 1Using T-40 torx wrench, remove the screws securing the pinion housing 19Remove the upper
differential mounting cap screws 2Using rubber mallet, remove the housingAccount for gasketRemove the fork, collar, and springNote