2007 Arctic Cat 700 Diesel ATV Service Manual, Page 152Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 152

NOTE: The rear shock absorber-to-lower A-arm torque factor is 2.8 kg-m (20 ft-lb) 3Remove the ATV from the support stand
cotter pin from the nutDiscard the cotter pin 3Remove the nut securing the hub4Remove the brake caliperAccount for two cap
screws and two 0.76 mm (0.030 in spacer washers 8Tap the ball joints out of the knuckle; then remove the knuckle9Remove the
lower shock absorber eyelet from the upper A-arm10Remove the cap screws securing the A-arms to the frame 5Remove the hub
assembly6Remove the cotter pin and slotted nut securing the tie rod end to the knuckle; then remove the tie rod end from