2007 Arctic Cat 700 Diesel ATV Service Manual, Page 153Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 153

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
green Loctite #609 to the entire outside diameter of the ball joint; then install the ball joint into the A-arm and secure
with the snap ringDE054A 4Secure the lower eyelet of the shock absorber to the upper A-armTighten nut to specifications5Secure
the A-arm assemblies to the frame mounts (from step 2)Tighten the cap screws to specifications ! CAUTION Do not tighten the
nut beyond the 4.8 kg-m (35 ft-lb) specification or the shock eyelet or mount WILL be damaged 6Install the knuckle assembly
onto the ball joints and secure with cap screwsTighten to specifications 2Install the A-arm assemblies into the frame mounts