2007 Arctic Cat 700 Diesel ATV Service Manual, Page 171Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 171

7Install the left-side and right-side splash panels and tighten the cap screws securelyInstall new nylon ties in the appropriate
in any way, replacement is necessary 1Clean the footrest using pressure washer2Inspect the footrest weldments for cracks
or unusual bends3Inspect all tubing for cracks or unusual bendsINSTALLING Footrests REMOVING 1Remove the machine screws and
flange nuts securing the front and rear fenders to the footwells 1Secure the footrests to the frame with four cap screws
and two flange nuts; then tighten securely2Place the footwells onto the footrests; then put the foot pegs in position and
secure with two cap screws 2Remove the cap screws securing the foot pegs to the footrests; then remove the foot pegs and