2007 Arctic Cat 700 Diesel ATV Service Manual, Page 172Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 172

2Install the two exhaust springs Belly Panel Rear Body PanelRack REMOVINGINSTALLING 1Remove the machine screws and shoulder
damaged in any way, replacement is necessaryCD691A 3Remove two machine screws securing the tool tray4Disconnect the battery
(negative cable first)NOTE: The battery does not have to be removed to remove the rear body panel 1Inspect muffler externally
for cracks, holes, and dents2Inspect the muffler internally by shaking the muffler back and forth and listening for rattles
or loose debris inside the mufflerNOTE: For additional details on cleaning the mufflerspark arrester, see Section 2 5Disconnect
the taillightbrakelight; then remove the fuel tank cap and lift off the rear body panelInstall the fuel tank capNOTE: If
the front body panel has not been removed, the left-side and right-side panels and the two machine screws must be removed