2007 Arctic Cat 700 Diesel ATV Service Manual, Page 173Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 173

CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
2 ! WARNING Do not operate the ATV unless the headlight beam is adjusted properlyAn incorrectly adjusted beam will not provide
the operator the optimum amount of light Taillight Assembly REMOVING 1Unplug the three-prong connector and free the taillight
wiring harness from the frame2Remove the torx-head cap screws securing the taillight assembly to the frameAccount for any
washersCD690A 3Remove the taillight assemblyINSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any
way, replacement is necessary 3Install one shoulder screw and three plastic rivets (on each side) to secure the front of
the rear body panel to the footwells 1Inspect wiring harness, three-prong connector, lens, base, cap screws, and socket for
damage2Inspect all wires for corroding, pinching, and cracking3Inspect the bulb for wattage, voltage, and proper operationINSTALLING