2007 Arctic Cat 700 Diesel ATV Service Manual, Page 179Get this manual

2007 Arctic Cat 700 Diesel ATV Service Manual, Page 179

INSTALLING 1Place the return spring into the throttle control; then place the bushing and actuator arm into positionSecure
two halves of the throttle control onto the handlebars and secure with the two machine screwsADJUSTING To adjust throttle
cable free-play, see Section 2KX016A Drive Selector The automatic drive selector allows the operator to operate in either
2-wheel drive (rear wheels) or 4-wheel drive (all wheels)For normal riding on flat, dry, hard surfaces, 2-wheel drive should
be sufficientIn situations of aggressive trail conditions, 4-wheel drive would be the desired choiceTo either engage or disengage
the front wheels, move the switch to the 4WD position or to the 2WD position To adjust the differential lock cable, see Section
2 Shift Lever REMOVING 1Remove the E-clip securing the shift rod to the engine shift arm2Remove two cap screws, two self-tapping