2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 18Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 18

NOTE: On the TBX500650 H1, the seat, storage compartment cover assembly, compartment box, air filterfilter housing, and left-sideright-side
for this procedureAdjuster (pn ! WARNING Always wear safety glasses when using compressed air 2Remove the recoil starter
assembly; then remove the valve timing inspection plug and the cylinder head cover 3Place the valve adjuster onto the jam
nut securing the tappet adjuster screw; then rotate the valve adjuster dial clockwise until the end is seated in the tappet
adjuster screw4While holding the valve adjuster dial in place, use the valve adjuster handle and loosen the jam nut; then
rotate the tappet adjuster screw clockwise until friction is felt5Align the valve adjuster handle with one of the marks on
the valve adjuster dial6While holding the valve adjuster handle in place, rotate the valve adjuster dial counterclockwise
until proper valvetappet clearance is attainedNOTE: Refer to the appropriate specifications in Feeler Gauge Procedure sub-section