2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 30Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 30

2Remove the left-side splash panel3Loosen shift rod end jam nut (A) FI010A 10Turn the ignition switch to the ON position;
rod to the upper shift axleDiscard the lock nutNOTE: Never reuse lock nutOnce lock nut has been removed, it must be replaced
with new lock nut 5Push the upper shift axle down completely6Rotate the shift rod end as necessary to align its threaded
shaft with the hole in the upper shift axleSecure with new lock nut (B)Tighten securely7Tighten jam nut (A) to secure the
adjustment8Install the left-side splash panel; then install the seat9Loosen the front shift rod jam nut (1) (left-hand threads);
then loosen the rear shift rod jam nut (2) (right-hand threads) FrameWeldsRacks The frame, welds, and racks should be checked
periodically for damage, bends, cracks, deterioration, broken components, and missing componentsIf replacement or repair
constitutes removal, see Section 8 Electrical Connections The electrical connections should be checked periodically for proper