2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 48Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 48

(400Manual Transmission) Removing EngineTransmission 3-11 Top-Side Components3-14 Removing Top-Side Components 3-14 Left-Side
the engine Removing Engine Transmission ATV-0109 Many service procedures can be performed without removing the enginetransmission
from the frameClosely observe the note introducing each sub-section for this important information 6Remove the front and
rear fender panels (see Section 8)7Disconnect the fuel hose (1), carburetor vent hose (2), and the fuel pump vacuum hose
(3) from the carburetor AT THIS POINT If the technician's objective is to servicereplace left-side cover oil seals (3), front
output joint oil seal (1), rear output joint oil seal (1), andor the oil strainer (from beneath the engine transmission),
the enginetransmission does not have to be removed from the frame Secure the ATV on support stand to elevate the wheels !
WARNING Make sure the ATV is solidly supported on the support stand to avoid injuryCF178A 1Remove the seat 8Disconnect the
crankcase vent hose from the air cleaner housingRemove the clamp securing the air intake hose to the carburetor; then remove