2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 50Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 50

NOTE: Use cable ties or tape to secure the carburetor assembly above the handlebar to keep it from interfering with the
tension lead from the spark plugAt the ignition coil, remove the cap screw, nut, and the two wire leads; then remove the
coil18Disconnect the battery ground (negative) cable from the crankcase cover; then disconnect the positive cable from the
starter motorCF164A 20Loosen the clamp on the crankcase breather vent hose; then disconnect the hose and remove it21Remove
the enginetransmission fasteners in the following sequence: mounting ALower front: One cap screw, nut, spacer, and washer