2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 51Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 51

Top-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
timing inspection plug; then using the recoil starter, rotate the crankshaft to top-dead-center of the compression strokeNOTE:
Arctic Cat recommends the use of new gaskets, lock nuts, and seals and lubricating all internal components when servicing
the enginetransmission 22By sliding the rear of the engine out first, remove the enginetransmission from the left side of
the frame 1Remove the cap screws securing the two tappet coversRemove the two tappet coversAccount for the O-rings NOTE:
Keep the mounting hardware with the covers for assembly purposes or thread them back into the head to keep them separated