2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 53Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 53

6Using an awl, rotate the C-ring in its groove until it is out of the cylinder head; then remove the C-ringNOTE: Care should
the chain, slide the sprocket and camshaft out of the cylinder headAccount for an alignment pin 10Remove the cylinder head
from the cylinder, remove the gasket, and account for two alignment pins NOTE: Loop the chain over the cylinder and secure
it with wire to keep it from falling into the crankcase AT THIS POINT To service valves and cylinder head, see Servicing
Top-Side Components sub-section 8Remove the cam chain tensioner by lifting it from the chain cavity; then remove the two