2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 55Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 55

BRemove each ring by working it toward the dome of the piston while rotating it out of the groove AT THIS POINT To service
for the O-ring inside the cup AT THIS POINT To service any one specific component, only limited disassembly of components
may be necessaryNote the AT THIS POINT information in each sub-sectionNOTE: The enginetransmission does not have to be removed
from the frame for this procedure 4Remove the gear shift stopper (located above the hilow shift shaft)Account for the washer,
spring, and stopper Removing Left-Side Components ACoverStator Assembly 1Remove the two cap screws securing the starter to
the crankcase; then remove the starter2Remove the four cap screws securing the recoil cover to the left-side cover; then