2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 56Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 56

NOTE: To aid in installing, it is recommended that the assemblies are kept together and IN ORDER CF109 5Remove the cap screws
(pn 0444-075), remove the rotorflywheel assembly from the crankshaftAccount for the key; then remove the starter clutch gear
assembly (H) wwasherNOTE: Care must be taken that the remover is threaded all the way onto the rotorflywheelCC946 NOTE: Inspect
the inside of the left-side cover for any shaft washers and spacers that may have come off with the coverMake sure they are
returned to their respective shaftsAlso, make sure the alignment pins are in place BRotorFlywheel CIdle Gear Assembly NOTE: