2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 59Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 59

NOTE: Note the alignment dots on the cam plate and camshaft for installing purposes Right-Side Components NOTE: For efficiency,
have to be removed from the frame for this procedure 17Remove the Allen-head cap screws from the neutral switch base; then
remove the switchAccount for the two contacts and springs Removing Right-Side Components AOil Filter 1Using an adjustable
Oil Filter Wrench (pn 0644-389), remove the oil filterCC964 AT THIS POINT To service center crankcase components only, proceed
to Removing Right-Side Components 2If the engine has not been removed, lay the ATV on its left side; then remove the cap