2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 63Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 63

Center Crankcase Components NOTE: This procedure cannot be done with the enginetransmission in the frame Complete Removing
O-ring Separating Crankcase Halves 1Remove the five right-side mm cap screws (one from inside the case) securing the crankcase
halves; then remove the seven left-side mm cap screwsNote the location of the different-lengthed cap screws and wiring formCC091D
17Remove the two Phillips-head cap screws securing the strainer AT THIS POINT To service center crankcase components only,
proceed to Separating Crankcase Halves 2Remove the four left-side mm cap screws (two from inside the case) securing the crankcase