2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 66Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 66

AT THIS POINT To service crankshaft assembly, see Servicing Center Crankcase Components sub-section Servicing Top-Side Components
the valve cover on the Surface Plate (pn 0644-016) covered with #400 grit wet-or-dry sandpaperUsing light pressure, move
the valve cover in figure eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted
by bright metallic finishCorrect any high spots before assembly by continuing to move the valve cover in figure eight motion
until uniform bright metallic finish is attained Table of Contents (Servicing Components) NOTE: Critical enginetransmission
specifications are located at the beginning of this sectionServicing Top-Side Components 3-29 Valve Assembly 3-29 Piston
Assembly 3-32 CylinderCylinder Head Assembly 3-34 Servicing Left-Side Components 3-37 Recoil Starter 3-37 Measuring Shift
Fork (Thickness) 3-40 Measuring Shift Fork Groove (Width) 3-41 Measuring Shift Fork To Groove (Side Clearance) 3-41 Servicing
Right-Side Components 3-41 Primary Clutch Assembly3-41 Inspecting Oil Pump 3-44 Servicing Center Crankcase Components 3-44