2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 76Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 76

AssemblingInstalling 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting
the case; then thread the rope through the handle and secure it with double knotInstall the protective cover into the handle5Align
the inner hook of the spiral spring with the notch in the reel 9Remove the spiral spring from the case by lifting the spring
end up and outHold the remainder of the spring with thumbs and alternately release each thumb to allow the spring to gradually
release from the case10Unwind the rope from the reel and remove the ropeCleaning and Inspecting NOTE: Whenever part is worn
excessively, cracked, or damaged in any way, replacement is necessary 1Clean all components2Inspect the springs and ratchet
for wear or damage3Inspect the reel and case for cracks or damage4Inspect the shaft for wear, cracks, or damage5Inspect the
rope for breaks or fraying6Inspect the spiral spring for cracks, crystallization, or abnormal bends7Inspect the handle for