2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 81Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 81

6Place the clutch hub assembly into the primary gear assembly Servicing Center Crankcase Components NOTE: Whenever part
shims on the rear shaft NOTE: The primary clutch assembly is now completely assembled for installation INSPECTING OIL PUMP
1Place the left-side crankcase cover onto the left-side crankcase half to prevent runout of the secondary transmission output
shaft2Install the secondary driven output shaft assembly onto the crankcase3Mount the indicator tip of the dial indicator
on the secondary driven bevel gear4While rocking the driven bevel gear back and forth, note the maximum backlash reading
on the gauge5Acceptable backlash range is 0.05-0.33 mm (0.002-0.013 inCorrecting Backlash NOTE: If backlash measurement is
within the acceptable range, no correction is necessary 1Inspect the pump for damage2It is inadvisable to remove the screw