2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 94Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 94

4Place the bearing C-ring into position in the crankcase; then install the front shaft and rear shaft assemblies 7Place each
making sure the washer is on the countershaft 8Engage the four forks to the gear shift cam; then install the reverse shift
cam and spacer 6Install the reverse idle shaft with circlip making sure the oil hole in the shaft is facing downward; then
install washer, bushing, reverse idle gear, and washerNOTE: The reverse idle gear is directionalCare must be taken that it