2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 95Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 95

9Install the two gear shift fork shafts; then verify that the two crankcase half alignment pins are in placeNOTE: Prior
sticking occurs 6From the right side, install the five case half mm cap screws (one inside the case); then tighten only until
snugCC102D NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 2Using plastic mallet, lightly
tap the case halves together until cap screws can be installed3From the right side, install the four case half mm cap screws;
then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 7In crisscrosscase-to-case
pattern, tighten the mm cap screws (from steps 3-4) until the halves are correctly joined; then tighten to specificationsNOTE: