2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 97Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 97

7Install the gear shift shaft 9Place the chain into the crankcase; then secure it from the top side with wire for ease of
the hub and plate will have clearance between them and they will not operate properly 8Install the spacer, pin, and oil pump
drive gear onto the crank balancer shaft making sure the shoulder of the drive gear is facing inward toward the crankcase;
then secure with the washer and nut (threads coated with red Loctite #271) tightened to specifications 11Simultaneously,
place the primary clutch assembly and the centrifugal clutch housing on their respective shafts making sure the sleeve is