2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 99Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 99

20Using the oil filter wrench, install new oil filter CC073D FOil Filter NOTE: Steps 1-17 of the preceding sub-sections must
Gear Assembly BMagneto Rotor 1Place the starter into position on the crankcase and secure with the cap screwsNote the position
of the wiring form 18Place the gasket and right-side cover into position making sure the release roller guide remains correctly
positioned; then install the fifteen cap screwsCC065D 2Place the neutral switch base assembly into position making sure the