2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 102Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 102

13Install the two alignment pins into the left crankcase halfNOTE: Make sure that three washers and two alignment pins are
with the two cap screwsTighten securely ! CAUTION Make sure the speedometer gear and output shaft gear match up during assembly
14Place the gasket and left-side cover into position on the crankcaseNOTE: It may be necessary to push or pull the splined
HiLow range shift shaft to establish covercrankcase mating 15Install the fifteen mm cap screws and one mm cap screw to secure