2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 111Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 111

11Install the coil and connect the two wires; then install the high tension lead on the spark plug12Install the carburetor
the speed sensor lead to the wiring harness 15Place the reversehighlow shift linkage wbushing and washer onto the engine
shift shaft and secure with the E-clipCD787 18Install the exhaust pipe and secure with two cap screws; then install the muffler
onto the frame brackets and secure with exhaust springs 16Place the gear shift lever into position on the shaft on the engine;