2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 129Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 129

5Remove snap ring and gear from the output side of the gear clusterRemove the gear cluster and the inner shift fork togetherAccount
remove the remaining output shaft assembly unless absolutely necessaryIf the shaft is removed, the shaft nut must be replaced
with new one and the shaft must be re-shimmed 10Remove the secondary drive gearsecondary driven gear retaining nutFrom inside
the crankcase using rubber mallet, drive out the output shaft assemblyAccount for the output shaft, shim, washer, and the