2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 140Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 140

9Remove the spiral spring from the case by lifting the spring end up and outHold the remainder of the spring with thumbs
wear or damage3Inspect the reel and case for cracks or damage4Inspect the shaft for wear, cracks, or damage5Inspect the rope
for breaks or fraying6Inspect the spiral spring for cracks, crystallization, or abnormal bends7Inspect the handle for damage,
cracks, or deteriorationAssemblingInstalling 6Install the ratchet onto its pin making sure the end is properly installed
on the reel 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug
in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE: The spiral spring must
seat evenly in the recoil caseB604D 7Install the shaft, spring, and the spring cover 2Insert the rope through the hole in