2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 145Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 145

4Install the movable face sleeve aligning the hole in the spring seat with the spring anchor hole in the movable face CD052
spring holder on the spring engaging the spring end with the appropriate anchor hole 9Continue compressing the spring while
guiding the spring holder onto the hubWhen slight resistance is felt, stop turning the wing nut10Install the nut (threads
coated with red Loctite #271); then tighten the nut to specification using the spanner and torque wrench 7Assemble the notched-ring
nut, spring holding handle, one flat washer, and the wing nut in order on the pulley compressor bolt; then thread the wing