2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 153Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 153

Installing Right-Side Components AOil StrainerOil Pump 1Place the oil strainer and new O-ring into position beneath the crankcaseTighten
gear 2Noting the directional arrow from removing, place the strainer cover into position on the crankcase making sure the
O-ring is properly installed and secure with the four cap screws; then tighten the oil drain plug to specifications MD1019
MD1208 5Install the cam chainNOTE: Keep tension on the cam chain to avoid damaging the crankcase boss 3Place two alignment
pins and the oil pump into position on the crankcase and secure with the Phillips-head screws coated with blue Loctite #243Tighten