2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 154Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 154

10Install gear position indicator switch making sure the O-ring is well-oiled and properly positionedTighten cap screws
be taken when installing the flange nut; it has "left-hand" threads BClutch Cover CFixed Drive Face DMovable Drive Face NOTE:
Steps 1-10 in the preceding sub-section must precede this procedure 8Install the one-way sprag clutch making sure that the
green dot or the stamp tag OUTSIDE is directed away from the crankcase 11Install two alignment pins and place the clutch