2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 159Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 159

3Lubricate the inside wall of the cylinder; then using ring compressor or the fingers, compress the rings and slide the cylinder
should slide on easilyDo not force the cylinder or damage to the piston, rings, cylinder, or crankshaft assembly may occur
! CAUTION Care should be taken that the bottom of the chain guide is secured in the crankcase boss MD1349 MD1345 4Loosely
install the two nuts with washers which secure the cylinder to the right-side crankcase halfNOTE: The two cylinder-to-crankcase
nuts will be tightened in step 9 6Place the head gasket into position on the cylinderPlace the alignment pins into position;