2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 162Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 162

19Rotate the crankshaft until the first cap screw (from step 17) securing the sprocket to the camshaft can be addressed;
Bond Sealant to the mating surface of the valve cover; then place the valve cover into positionNote that the two alignment
pins are properly positionedMD1248 22Depress the spring-loaded lock and push the plunger into the tensioner NOTE: At this
point, the rocker arms and adjuster screws must not have pressure on them 27Install the four top-side cap screws with rubber
washers; then install the remaining cap screwsTighten only until snug 23Place the cam chain tensioner assembly and gasket
into the cylinder making sure the ratchet side is facing toward the top of the cylinder and secure with the two Allen-head