2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 167Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 167

(500Automatic Transmission 650 H1) Removing EngineTransmission 3-130 Top-Side Components3-134 Removing Top-Side Components
rivets securing the side panels; then remove the panels Removing Engine Transmission Many service procedures can be performed
without removing the enginetransmission from the frameClosely observe the note introducing each sub-section for this important
information 5Remove the instrument pod; then remove the front rack and front body panel (see Section 8)6Drain the oil from
beneath the enginetransmission; then drain the coolant AT THIS POINT If the technician's objective is to servicereplace left-side
cover oil seals (3), front output joint oil seal (1), rear output joint oil seal (1), andor the oil strainer (from beneath
the enginetransmission), the enginetransmission does not have to be removed from the frame Secure the ATV on support stand
to elevate the wheels 733-441A ! WARNING Make sure the ATV is solidly supported on the support stand to avoid injury 1Remove