2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 169Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 169

13Secure the carburetor assembly up and away from the engine14Remove the E-clip securing the shift rod to the engine shift
cap screws securing the rear driveshaft 15Remove the springs securing the muffler to the exhaust pipe; then remove the mufflerAccount
for the two exhaust springs 19Remove the positive cable from the starter motor and route it out of the way 16Remove the two
cap screws securing the exhaust pipe to the cylinder head; then remove the pipe 20Disconnect the speed sensor connector from