2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 178Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 178

14Remove the shift shaft noting the timing marks for assembling purposesAccount for two washers Right-Side Components NOTE:
does not have to be removed from the frame for this procedure Removing Right-Side Components AV-Belt Cover BDriven Pulley
CClutch Cover 15Remove the gear shift cam plate; then remove the cam stopper and cam stopper springAccount for two washers
1Remove the cap screws securing the V-belt cover noting the location of the different-lengthed cap screws for installing
purposes; then using rubber mallet, gently tap on the cover tabs to loosen the cover 2Remove the nut securing the movable