2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 195Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 195

3Apply low-temperature grease to the spring and hub4Thread the end of the rope through the guide hole of the case; then thread
in the notch of the reel11Rotate the reel four turns counterclockwise; then release the rope from the notch and allow the
rope to retract12Pull the rope out two or three times to check for correct tensionB604D 7Install the friction spring and
the spring cover NOTE: Increasing the rotations in step 11 will increase spring tension 13Place the recoil starter assembly