2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 196Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 196

INSPECTING OIL PUMP Servicing Right-Side Components NOTE: Whenever part is worn excessively, cracked, damaged in any way,
involves relaxing compressed spring assemblyDO NOT attempt disassembling without the proper tools 1Secure Driven Pulley Compressor
(pn 0444-121) in suitable holding fixture such as bench vise; then remove the wing nut, holding handle, flat washer, and
pilot bushing leaving the large spacer on the compressor tool baseATV1014 INSPECTING CLUTCH HOUSING 1Inspect the clutch housing
for burns, grooving, cracks, or uneven wear2If the housing is damaged in any way, the housing must be replacedINSPECTING
PRIMARY ONE-WAY DRIVE 1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates
only one direction3If the inner race is locked in place or rotates both directions, the drive assembly must be replaced 2Place