2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 197Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 197

3Install the pilot bushing with the machined end directed down; then fit the bushing into the pulley hub ! WARNING The spring
the wing nut counterclockwise to relax the springNOTE: There will be tendency for the handle to rotate clockwise approximately
turn as the spring holder clears the flats or hubThis is due to slight counterclockwise preload on the spring 5Place the
holding handle on the spring holder fitting the two dowel pins into the spring holder face; then install flat washer and
the wing nutTurn the wing nut down until resistance is feltNOTE: Do not use the wing nut to compress the spring furtherCD052