2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 199Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 199

NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed CF097 2Apply
spring through the sleeve and into the spring anchor hole in the movable face 6Place the spring holder on the spring engaging
the spring end with the appropriate anchor holeCD060 3Install the four pins and spacers into the fixed face hub; then pack
the cam slots in the movable face with multi-purpose grease 7Assemble the notched-ring nut, spring holding handle, one flat