2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 202Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 202

2Acceptable width range must be within specificationsMeasuring Crankshaft (Runout) 1Place the crankshaft on set of blocks2Mount
crankshaft slowly ! CAUTION Care should be taken to support the connecting rod when rotating the crankshaft 4Maximum runout
must not exceed specificationsNOTE: Proceed to check runout on the other end of the crankshaft by positioning the indicator
contact at point and following steps 2-4 1Push the lower end of the connecting rod to one side of the crankshaft journal2Using
feeler gauge, measure the gap between the connecting rod and crankshaft journal Measuring Crankshaft (Web-to-Web) 1Using
calipers, measure the distance from the outside edge of one web to the outside edge of the other web 3Acceptable gap range