2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 206Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 206

NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 6From the left side, install the remaining
Rotate the shafts back and forth to ensure no binding or sticking occursCD994 2Install the secondary shaft bearing housing
making sure the two alignment pins are properly positionedTighten the Allen-head screws securely 10In crisscrosscase-to-case
pattern, tighten the mm cap screws (from steps 7-8) to specificationsNOTE: Rotate the shafts back and forth to ensure no
binding or sticking occurs AT THIS POINT After completing center crankcase components, proceed to Installing Right-Side Components,
to Installing Left-Side Components, and to Installing Top-Side ComponentsCD999 Installing Right-Side Components 1Install
the shift indicator sending unit making sure the two neutral contact pins and the two springs are properly positionedTighten