2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 207Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 207

4Install the oil pump drive gear spacer onto the crank balancer shaftGrease the pin and insert it into the shaft; then install
washer (with the flat side facing the assembly as noted in removing) and the nut (threads coated with red Loctite #271)Tighten
to specifications ! CAUTION Care must be taken that the directional washer be installed correctly and note that the nut has
left-hand threads 5Grease the driven gear pin and insert it into the oil pump shaft; then install the driven gear (noting