2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 208Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 208

11Place the clutch coverclutch housing assembly into position on the crankcase; then secure with the cap screws making sure
and install the gasket onto the crankcase9Apply grease to the outer edges of the clutch housing; then from inside the clutch
cover, install the clutch housing into the cover using rubber mallet10Install the one-way clutch onto the clutch shoe assemblyCD970
13Place the driven pulley assembly into position and secure with the nutTighten to specifications ! CAUTION When installed